Sony NSZ-GS7 Quick Setup Manual

Quick Setup Guide
http://www.sony.net/helpguide/r/networkplayer/
Sony Customer Support:
USA: http://esupport.sony.com/ | 1-800-222-SONY
Network Media Player
Canada: http://esupport.sony.com/CA/ | 1-877-899-SONY
NSZ-GS7
Please Call Before Returning the Product to the Store
Connection
1
Connect to your TV and Set Top Box/Digital Video Recorder*
step
A
Follow : to connect to your TV directly.
B
: to connect to your TV via AV Receiver
C
: if your connection differs from the diagrams below.
A
Direct to TV
HDMI cable
(not supplied)
TV
HDMI cable (not supplied)
Set Top Box /
Digital Video Recorder
* You can use this player without a Set Top Box/Digital Video Recorder, but doing so limits the availability of various TV viewing functions.
2
Prepare for Network
step
connection
Skip to step 3 if you want to use a wireless
connection.
Broadband
router* *2
1,
LAN cable (not supplied)
*1 When using wireless connection, you need to set the Network Setup in the Initial Setup Wizard (on step 4).
*2 You can find MAC address in the Initial Setup Wizard (step 4) as needed. Select "Explain step" on "Connect to the Internet" screen.
To control connected devices using the remote*
Install the player close to the connected devices.
This player is equipped with a built-in IR Blaster that sends remote commands to
various connected devices so you can control them with your remote.
If you still cannot control the connected device with the method above,
use the supplied "IR Blaster cable."
 Connect the IR Blaster cable to the player.
 Place the IR Blaster close to the connected device, as illustrated on the right.
US
See the online "Help Guide" for
a complete guide:
B
To TV via AV Receiver
HDMI cable
(not supplied)
TV
HDMI cable (not supplied)
Set Top Box /
Digital Video Recorder
3
Connect to the power
step
source
AC power cord
 Connect to the power
source
 Change the TV input
Switch the input selector on the TV
so that the signal from the player
appears on your TV screen.
Then, a screen that shows how to
setup your remote appears.
Note
This will only appear the first time you setup your
player.
1
In the Box
Network Media Player (1)
Remote control (Remote) (1)
AC power cord (1)
Size AA batteries (2)
IR (infrared) Blaster cable (1)
Quick Setup Guide (1)
Getting Started (1)
Reference Guide and
other documents
AV Receiver
step
Follow the directions for the Initial Setup
displayed on screen.
– The screen may stay dark for several seconds after the
– When the Initial Setup screen (on which a picture of
– Complete the Network setup process, otherwise the Initial
– It takes about 15 minutes to complete the Initial Setup.
IR Blaster
cable
© 2012 Sony Corporation
Printed in China
4-453-328-11(1)
What's this?
Use the cable to control devices that are not installed close
to each other if you want to control the devices with your
remote.
Please see "To control connected devices using the remote"
shown below for more information.
C
Other connection
See Help Guide for other connection patterns.
From your PC
http://www.sony.net/helpguide/r/networkplayer/
From your smartphone
4
Start the Initial Setup
Wizard
Sony logo appears, then the Initial Setup screen appears.
a player and a hand holding a remote is displayed)
appears, press and hold (Enter) to pair your remote
with the player.
Setup Wizard cannot be closed.
*
2
* This function only works when the player is turned on.
1
* 2 Location of the IR receiver may vary depending on the product you are using.