Amp-L Board, Amp-R Board - Sony SRS-ZR7 Service Manual

2-5.

AMP-L BOARD, AMP-R BOARD

3 AMP-L board connector
(CN802)
The opposite side is the terminal side.
1 two sheet (B)
sheet (B)
flexible flat cable (FFC1)
When installing the flexible flat cable, ensure that
the colored line is parallel to the connector after insertion.
OK
Insert straight into the interior.
flexible flat
cable
colored line
connector
This side is the terminal side.
5 AMP-L board connector
(CN801)
7 AMP-L board connector
(CN805)
6 saranet
cushion
The opposite side is
the terminal side.
2 AMP-R board connector
(CN851)
passive radiator
qa AMP-L board
hole
q; four screws
(BTTP M2.6
q; four screws
(BTTP M2.6
NG
Insert at a slant.
flexible flat
cable
colored line
connector
ferrite core
ferrite core
8 saranet
cushion
AMP-L
board
hole
connection cable
(GND strap)
hole
hole
8)
8)
Insert the connector straight into the interior.
There is a possibility that using this unit without
the connector correctly installed will damage it.
OK
Insert straight into
the interior.
connector
connector
4 Remove the flexible flat cable
(FFC1) from the hole.
hole
9 AMP-R board connector
(CN854)
– – –
ferrite core
saranet cushion
saranet cushion
boss
boss
boss
hole
connection cable
hole
(GND strap)
qa AMP-R board
NG
Insert only part way. Insert at a slant.
connector
connector
connector
SRS-ZR7
Ver. 1.3
–
AMP-R board
boss
boss
NG
connector
13