Baffle Block - Sony SRS-ZR7 Service Manual

SRS-ZR7
Note: Follow the disassembly procedure in the numerical order given.
2-2.

BAFFLE BLOCK

1 ten screws
(HEX 3 10)
5 L-ch subwoofer terminal (wide) [white]
Note 1: The terminal is locked firmly.
Please remove the terminal
carefully not to be damaged.
5 L-ch subwoofer terminal (narrow) [black]
Note 1: The terminal is locked firmly.
Please remove the terminal
carefully not to be damaged.
6 baffle block
Note 2: When installing the speaker wire, toward the caulking
of terminals in the direction of the speaker unit.
10
front side
4 L-ch speaker cable connector
(CN804)
3 sheet (B)
caulking part
speaker unit
Insert the connector straight into the interior.
There is a possibility that using this unit without
the connector correctly installed will damage it.
OK
Insert straight into Insert only part way.
the interior.
connector
connector
connector
top side
sheet (B)
2 Draw out the baffle block in
the direction of the arrow.
3 sheet (B)
5 R-ch subwoofer terminal (narrow) [black]
Note 1: The terminal is locked firmly.
Please remove the terminal
carefully not to be damaged.
5 R-ch subwoofer terminal (wide) [white]
Note 1: The terminal is locked firmly.
Please remove the terminal
carefully not to be damaged.
NG NG
Insert at a slant.
connector
connector connector
4 R-ch speaker cable connector
(CN853)