Page 2
CASE SPECIFICATION INTRODUCTION CHASSIS BREAKDOWN DRAWINGS Chassis main body Model Svive Halo S650 2. Left tempered glass side panel Materials Chassis 0.6 mm SPCC, tempered glass on left side panel 3. Right side panel Motherboard support EATX(272*305), ATX, M-ATX, ITX 4.
Page 3
I/O PORTS INTRODUCTIONS SIDE PANEL INSTALLATION screws screws 2. Unscrew the drop-proof screws (1), pull out the top of 1. Unscrew the drop-proof screws (1), pull out the right side the glas panel and lift it from the frame. Handle the glas 1.
Page 4
HDD INSTALLATION SSD INSTALLATION POWER SUPPLY INSTALLATION MOTHERBOARD INSTALLATION Remove the front panel by pulling firmly in the bottom of the A. Remove the screws, B. Mount the SSD to the 1. Remove the right side panel and insert PSU. 9 pre-installed motherboard spacers in factory panel.
Page 5
RGB CONTROLLER DUST FILTER DISASSEMBLY Controller functions The controller can be controlled by mainboard (MB mode) or by the control switches on the front panel (Switch mode). When the controller is connected to a ARGB header on a mainboard it is in Bottom dust filter can be MB mode and is controlled by the computer.
Need help?
Do you have a question about the Halo S650 and is the answer not in the manual?
Questions and answers