Selecting The Bu Trans; Adding The Serial Number - Sony KDL-32EX427 Service Manual

SELECTING THE BU TRANS

This procedure is to copy the White Balance adjustment data from
the TCON Board to the Main Board. The BU Trans service item is
under the VPC service menu.
Verify before proceeding to the next step:
; Selected the Segment Code
; Selected the Destination
; Selected the Model Name
12. Press JUMP or
until the VPC menu displays.
VPC
000
000
13. To change the data value of the BU_Trans, press
increase the data value to 1.
VPC
000
000
KDL-32EX427/32EX527/40EX527/46EX527
SECTION 7 - SERVICE ADJUSTMENTS
OPTIONS on the Remote Commander
SERVICE
DATA_COPY
BU_TRANS 0
SERVICE
DATA_COPY
BU_TRANS 1
NOTE: If the message displays
transfer is not complete. If that occurs, repeat step
VPC
000
000
DATA TRANSFER NG
If successful, the data value changes to 3.
VPC
000
000
DATA TRANSFER SUCCESS
14. Verify the Data Transfer Success message displays.
3 to
15. Proceed to "Adding the Serial Number."

ADDING THE SERIAL NUMBER

The replacement board does not contain a serial number. Use the
following instructions to add the customer's serial number.
CAUTION: The serial number can only be entered once. Please
make sure to enter the correct serial number for the customer's TV.
"DATA TRANSFER
SERVICE
DATA_COPY
BU_TRANS 2
SERVICE
DATA_COPY
BU_TRANS 3
NG" the
13 .
59