1-7-9. Selecting the BU TRANS
[To BU_TRANS of VPC]
a. Press the OPTIONS key to go to the VPC Service menu. (There are 3 Service menus "DIGITAL"
b. Press the "2/5" key on the remote commander to select 000 DATA COPY.
c. Press the "1/4" key on the remote commander to select 000 BU_TRANS.
d. Press the "3/6" key on the remote commander to select from 0 to 1. Data transfer will be done in few seconds.
OPTIONS
b
d
c
Remote Commander
Service Procedure for Panel, Board and Software Change / Upgrade(WW)
Press 2: increment
Press 3: increment
Press 5: decrement
Press 6: decrement
VPC SERVICE
000 DATA_COPY
000 BU_TRANS 1
Press 1: increment
Press 4: decrement
VPC Service menu
This procedure is to copy W/B adjustment data in T-con board on Panel to BA* board.
Note: This procedure is necessary for KDL-**HX85* only.
VPC SERVICE
000 DATA_COPY
NG
000 BU_TRANS 2
DATA TRANSFER NG
VPC SERVICE
OK
000 DATA_COPY
000 BU_TRANS 3
DATA TRANSFER SUCCESS
SERVICE BOARD
"CHASSIS"
"VPC")
23