Advertisement
4.
installation
4.1.
V-scan setup
4.1.1.
To install the software, the App needs to be downloaded
first, then the actual vehicle software (over Wifi).
4.2.
installing app
4.2.1.
Install App to your phone or tablet (Android only) by
either scanning the QR code right, or from Google Play.
For Google Play, search SEALEY VSCAN (fig.4).
5.
configure Vci
5.2.1.
Connect the VCI (Vehicle Connection Interface) to an EOBD/OBDII vehicle and turn ignition
on, light will flash showing the VCI has power. The vehicles EOBD/OBDII connector is usually in
the area under the steering wheel. For more information, refer to the vehicle's handbook.
5.2.2.
On your phone or tablet open 'Settings' and turn Bluetooth ON (fig.1).
5.2.3.
Scan for Bluetooth devices and pair (fig.2).The V-Scan ID/serial number will be unique to your
V-Scan and shown on the label of the VCI (example BD160000****). Keep this number safe
because may be required at a later date (fig.2)
fig.1
5.2.4.
Choose your ID and input 0000 or 1234 as password and select OK (fig.3).
5.2.5.
If the Android version of your phone or tablet is higher than 4.4, it may show two Bluetooth
devices. You may need to connect both. make sure the Bluetooth pairing is successful.
5.2.6.
Open the V-Scan App on your phone or tablet (fig.4) will then connect to the VCI automatically
each time the V-Scan is used, but must be connected to a vehicle to power the VCI.
5.2.7.
once successfully connected, select 'VCI' icon on Home Page to check for any VCI updates
(fig.5).
fig.3
© Jack Sealey limited
Original Language Version
QR Code
fig.2
fig.4
fig.5
VSCAN Issue 1 09/04/18
6.
installing Vehicle software
note: Before initial use the software will need to be downloaded onto the phone/tablet. This
should be done over Wifi because will be a more stable connection and faster.
6.1.
With phone/tablet connected to Wifi, press 'Update' icon. Select 'Manual Selection' (fig.6) then
'download new diagnostic software' (fig.7). It will depend on the phone/tablet if the software can
be saved into the devices memory or a SD card (if fitted). The software is NOT big so won't take
up much memory. Software storage space requires approximately 50mB. Software will take
approximately 30 minutes to download depending on the speed of the Wifi connection.
fig.6
7.
after sales & tech support
7.1.
The product is supplied with a 1 year warranty and 1 year of updates. The V-Scan has the facility
to report any vehicle software issues 'feedback icon', which is important to use to keep the
software as up to date, bug free and user friendly as possible.
7.1.1.
Hardware issues (VCI) and loading software - contact Sealey technical support on 01284 757505
7.1.2.
Report vehicle software issues – use 'Feedback' facility.
8.
upDates
8.1.
The product is supplied with 1 year of updates. once the initial 1 year of updates has expired,
contact Sealey technical support on 01284 757505 to purchase/renew the subscription for another
12 months.
9.
inforMation
9.1.
For more information on how to install/delete software within the app, select 'FAQ' icon
(Frequently Asked Questions) on the app Home Page (fig.5).
enVironMent protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycling centre and disposed of in a manner which is
compatible with the environment. When the product becomes completely unserviceable and
requires disposal, drain any fluids (if applicable) into approved containers and dispose of the
product and fluids according to local regulations.
weee regulations
dispose of this product at the end of its working life in compliance with the eU directive on Waste
electrical and electronic equipment (Weee). When the product is no longer required, it must
be disposed of in an environmentally protective way. Contact your local solid waste authority for
recycling information.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications
and component parts without prior notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey group, Kempson way, suffolk Business park, Bury st edmunds, suffolk. ip32 7ar
01284 757500
01284 703534
© Jack Sealey limited
Original Language Version
fig.7
sales@sealey.co.uk
www.sealey.co.uk
VSCAN Issue 1 09/04/18
Advertisement
