Troubleshooting - Makita XLC05 Instruction Manual

Press in the whole edge of the sponge filter against the
recessed wall inside the dust bag/paper filter mounting
area.
► 1. Recessed wall

Troubleshooting

Before asking for repairs, check the following points.
Symptom
Weak suction power
Not working
Dust case cover does not close
NOTE: Do not attempt to repair cleaner by yourself.
1
Is dust bag or paper filter full of dust ?
Is dust bag clogged ?
Is paper filter clogged ?
Is the battery cartridge exhausted ?
Is the battery cartridge exhausted ?
Is dust bag or paper filter set ?
Wall mount for cordless cleaner
Optional accessory
NOTE: The screw to mount the holder is not included.
Prepare a screw which fits with the material to screw
into.
Attach the wall mount for cordless cleaner to a hard
wooden wall, beam or column, where the wall mount
for cordless cleaner can be firmly secured. Always be
sure that the wall mount for cordless cleaner is securely
attached before hanging the cleaner.
► 1. Wall mount for cordless cleaner
CAUTION:
mount violently or hang other appliances than the
cleaner.
Area to be investigated
14 ENGLISH
1
Do not hang the cleaner to the wall
Fixing method
Empty dust bag or paper filter.
Dust down or wash the dust bag.
Replace paper filter.
Charge the battery cartridge.
Charge the battery cartridge.
Set dust bag or paper filter.