Advertisement
Note that Telco lines and some PBX systems only provide a limited amount of time to program the
phone before the line tells the phone to hang-up. See page 2 for a programming template and tips
to assist in programming the phone in these situations.
Step 1: Plug the phone line from the phone into the phone jack.
Step 2: Program Emergency Numbers
a. Press the red
b. To program first emergency number: Press 1, *, (key in the phone number), press the
VOL
key
Step 3: Program Auto Answer
a.
Press 8, *, (1 or 2) (Auto Answer 1=ON, 2=OFF)
Step 4: To End Programming
a.
Slide S15 to 1 and press the
MADE IN THE USA
3 YEAR WARRANTY
ON/OFF
key, then slide S15 to ON / Prog (see photo below)
red
ON/OFF
N56W24720 N. Corporate Circle • Sussex, WI 53089
800-451-1460 • www.rathcommunications.com
Programming for Line Powered
Speaker Phone with Autodialing
key
RP8500LPSA
Ver. 3
06/15
pg 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rath RP8500LPSA
Summary of Contents for Rath RP8500LPSA
- Page 1 Step 3: Program Auto Answer Press 8, *, (1 or 2) (Auto Answer 1=ON, 2=OFF) Step 4: To End Programming Slide S15 to 1 and press the ON/OFF RP8500LPSA N56W24720 N. Corporate Circle • Sussex, WI 53089 Ver. 3 06/15 MADE IN THE USA 800-451-1460 •...
- Page 2 Step 1. Press the red ON/OFF key, then slide S15 to ON/Prog. Step 2. Press 1, *, _ _ _ _ _ _ _ _ _ _, VOL Key RP8500LPSA N56W24720 N. Corporate Circle • Sussex, WI 53089 Ver. 3 06/15 800-451-1460 •...
Need help?
Do you have a question about the RP8500LPSA and is the answer not in the manual?
Questions and answers