Related Manuals for Rath 2400 Series
Summary of Contents for Rath 2400 Series
- Page 1 Installation & Operations Manual 2400 Series Line Powered Phone Detailed Programming N56W24720 N. Corporate Circle Sussex, WI 53089 RP8500LPEXP Made in the USA Ver. 1 800-451-1460 www.rathcommunications.com 3 Year Warranty 09/19...
- Page 2 Thank you for purchasing a RATH 2400 Series Phone. We are the largest Emergency Communication ® Manufacturer in North America and have been in business for over 35 years. We take great pride in our products, service, and support. Our Emergency Products are of the highest quality.
- Page 3 1. Crimp the phone line on to the center pins of a standard RJ11 jack and plug into TEL LINE input on the back of the 2400 Series phone. 2. Connect the phone line to a female RJ11 jack then take the phone line cord provided with the 2400 Series phone from the jack to the TEL LINE input on the 2400 series phone.
- Page 4 Programming Location Message: RATH® phones can play a location message when the call is answered. This feature is used when the phone is calling a phone number that cannot identify where the call is coming from by caller ID, or needs more location information than caller ID can provide.
- Page 5 ON/OFF button. When the phone has dial tone, press the blue VOL button. Each time you push the VOL button, the volume will go up or down one level. 2400 Series phones have three volume levels: high, medium, and low.
- Page 6 Phone does not call out: • Verify the voltage on phone line and dial tone. Phone lines can have voltage but no dial tone. 2400 Series phones must have dial tone or a valid ring down circuit to call out properly.