Advertisement
Quick Links
Plastic Uncapping Tank
HH-231
Package
Contents:
• 1- Plastic Cover
• 1- Gray Tub with Honey
Gate
• 1- Gray Tub without Bottom
• 1- Strainer Grate
• 1- Crossbar with 2 Bolts, 2
Nuts and 1 Screw
• 2 - 9⅛" (23.18 cm) Wood
End Bars (used to tighten
Honey Gate)
501 1st St S, Hackensack, MN 56452
500 Santa Anita Dr., Woodland, CA 95776
485 Stewart Rd, Wilkes-Barre, PA 18706
1600 Commerce Street, Marshall, TX 75672
Telephone: 800-880-7694
www.mannlakeltd.com
MLL 09-INS Rev: 10/29/18
Advertisement
Related Manuals for MANN LAKE HH-231
Summary of Contents for MANN LAKE HH-231
- Page 1 Plastic Uncapping Tank HH-231 Package Contents: • 1- Plastic Cover • 1- Gray Tub with Honey Gate • 1- Gray Tub without Bottom • 1- Strainer Grate • 1- Crossbar with 2 Bolts, 2 Nuts and 1 Screw • 2 - 9⅛” (23.18 cm) Wood...
- Page 2 Place the Wood End Bars on top of each other and insert them wide end first into the back of the Honey Gate and unscrew the back from the front of the Honey Gate. Place the Honey Gate front on the outside of the Gray Tub and the Honey Gate back on the inside of the tub and tighten both pieces together, using the Wood End Bars to help tighten the Honey Gate securely.
- Page 3 Uncap your frames completely using an uncapping knife and uncapping scratcher (both available separately) To use as a straining tank, take the top tub off and rotate it 180 degrees before placing it back on the tub with the honey gate. Cleaning Instructions Wash all equipment before use.