Fluke DTX Series User Manual page 27

Setting
SETUP > Instrument
Settings > Store Plot
Data
SPECIAL FUNCTIONS >
Set Reference
Settings for saving tests
Table 1. Twisted Pair Test Settings (cont.)
Yes: the tester displays and saves plot data for frequency-based tests such as NEXT, return loss,
and attenuation. This lets you include plots on test reports created in LinkWare software.
No: plot data is not displayed or saved, which lets you save more results.
The tester must be referenced to the smart remote the first time the two units are used
together. You should also set the reference every 30 days. See "Setting the Reference" on page
22.
See "Preparing to Save Tests" on page 25.
Description
Twisted Pair Test Settings
21