Neato Robotics Neato XV-11 Quick Start Manual
Vacuum
Hide thumbs
Also See for Neato XV-11:
- User manual (50 pages) ,
- Quick start manual (2 pages) ,
- User manual (50 pages)
Advertisement
1
Plug in the charging base
Place the base 3 feet from any corner and
make sure there is space in front of the
charging base for the Neato Vacuum to
dock.
NOTE: Ensure that the base is sitting up
against a wall and is not tilted forward.
2
Select language and charge
your Neato Vacuum
Place your Neato Vacuum up against the
charging base.
The LCD screen will light up and prompt
you to select a language for the display
screen. Use the up and down arrows to
select the language, then press SELECT.
Once the language is selected, the light
around the START button will light up to
let you know it is charging. When it is
solid green in approximately 2 to 3 hours,
it's ready to clean.
3
Start cleaning!
Press START to wake up the Neato
Vacuum (you may have done this while
taking it out of the box).
Press START again to begin vacuuming
your floors!
NOTE: For best performance, remove
small items from your floors, and secure
any loose cables.
Neato Vacuum
Quick Start Guide
Register now at
www.NeatoRobotics.com
/register
to get future
software updates
and discounts!
Advertisement
Table of Contents
Related Manuals for Neato Robotics Neato XV-11
Summary of Contents for Neato Robotics Neato XV-11
- Page 1 Register now at www.NeatoRobotics.com /register to get future software updates and discounts! Neato Vacuum Quick Start Guide Plug in the charging base Place the base 3 feet from any corner and make sure there is space in front of the charging base for the Neato Vacuum to dock.
- Page 2 Neato Robotics, Inc. 1916 Old Middlefield Way Suite A Mountain View, CA 94043 www.NeatoRobotics.com p/n 515-0001 rev 4C-US Copyright © 2011 Neato Robotics, Inc. Neato Robotics is a registered trademark, and Neato XV-11 is a trademark of Neato Robotics, Inc.
Need help?
Do you have a question about the Neato XV-11 and is the answer not in the manual?
Questions and answers
the menu box is lit but no menu listed
The menu box on the Neato Robotics XV-11 is lit but showing no menu because the battery voltage is too low to power the LCD screen. When the voltage is insufficient, the robot enters a "dead mode," preventing it from charging or displaying anything on the screen.
This answer is automatically generated