Daily Use - AEG FAVORIT 45020 VI User Manual

DAILY USE

1. Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode. Refer to 'SET-
TING AND STARTING A PRO-
GRAMME'.
• If the salt indicator is on, fill the salt
container.
USING THE DETERGENT
A
Do not use more than the correct
quantity of detergent. Refer to the
instructions on the detergent
packaging.
Detergent tablets do not fully dis-
solve with short programmes and
detergent residues can stay on
the dishes.
We recommend that you use de-
tergent tablets with long pro-
grammes.
SETTING AND STARTING A
PROGRAMME
Setting mode
The appliance must be in setting mode to
accept some operations.
The appliance is in setting mode when,
after the activation, all the programme in-
dicators come on.
If the control panel shows other condi-
tions, press and hold function buttons (B)
B
30
A
20
+ -
C
3. Make sure that there is rinse aid in the
rinse aid dispenser.
4. Load the baskets.
5. Add the detergent.
6. Set and start the correct programme
for the type of load and the degree of
soil.
CAUTION!
Use only detergents for dishwash-
ers.
1. Press the release button (B) to open
the lid (C).
2. Put the detergent in the compart-
ment (A) .
3. If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
4. If you use detergent tablets, put the
tablet in the compartment (A).
5. Close the lid. Make sure that the re-
lease button locks into position.
and (C) at the same time until the appli-
ance is in setting mode.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode.
3. Press the button of the programme
you want to set.
• The related programme indicator
stays on.
• All the other programme indicators
go off.
4. Close the appliance door. The pro-
gramme starts.
Starting a programme with
delay start
1. Set the programme.
ENGLISH
31