AEG FAVORIT 45020 VI User Manual page 29

Electronic adjustment
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode. Refer to 'SET-
TING AND STARTING A PRO-
GRAMME'.
2. Press and hold function buttons (B)
and (C) at the same time until the indi-
cators of function buttons (A), (B) and
(C) flash.
3. Press function button (A).
• The indicators of function buttons
(B) and (C) go off.
• The indicator of function button (A)
continues to flash.
• Intermittent acoustic signals oper-
ate and the end indicator flashes
FILLING THE SALT CONTAINER
showing the setting of the water
softener.
– The number of flashes of the end
indicator and the number of the
acoustic signals show the level of
the water softener.
Example: 5 acoustic signals and 5
flashes + pause + 5 acoustic sig-
nals and 5 flashes = level 5.
4. Press function button (A) again and
again to change the setting. Each time
you press function button (A) you go
to the next level.
5. Deactivate the appliance to confirm.
1.
Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt contain-
er (only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it, af-
ter you fill the salt container, start
a programme.
ENGLISH
29