Harken T2 2146 Instructions page 4

If you have access to end of
boom, twist each lap. Secure
using double fisherman's knot
or other secure knot. See
"Lashing to Bail Using Harken-
Supplied Line" on page 3.
Inspect lashing line for chafe or UV-damage every time you sail.
Replace damaged line immediately. Replace line with no
visible damage every two-years. Use Harken replacement
line, but if using own line, see "Using Alternate Line, Knots and
Splices" and chart on page 4 for important information to help
you select the correct line.
WARNING! Failure to inspect and replace UV-damaged, worn, or frayed line can cause
the line to break suddenly when load is applied.
Check knots or splices before sailing. Use a double fisherman's knot or other secure knot.
WARNING! Failure to inspect and correct knots can cause the line to slip suddenly when
load is applied.
Replacement Line
Part
No. Description
2146 29 mm
2149 40 mm
2152 57 mm
Lashing to Boom (Continued)
Inspect Line Every Time You Sail
Sheave Replacement
Ø Loops /Lines
29 mm HCP1438
40 mm HCP1419
57 mm HCP392
Replacement line
Ø before making loop
in mm ft
/ 2 4
1
16
/ 2.5 4
3
32
/ 3 4
1
8
4
Line length
m
1.22 Maxibraid
1.22 Maxibraid
1.22 Maxibraid
Line
Type