To Replace Needle Thread Tension Unit - ELNA Elinita EF72 Service Manual

Hexagonal
socket screw

To replace needle thread tension unit

Thread
tension
release arm
Thread
tension
release plate
Thread
tension unit
To remove:
1. Remove the face plate, top cover, thread guide cover
and arm thread guide (refer to pages 1, 5 and 6).
2. Lower the presser foot lifter.
3. Loosen the hexagonal socket screw.
4. Remove the thread release plate from the thread
release arm. Remove the thread tension unit.
To attach:
1. Follow the steps of removal procedure in reverse.
20