Table of Contents
Advertisement
1.4.5.1 Creating the Error Log
1.
Insert the Advanced Diagnostics diskette into the diskette drive.
2.
Press 0 (SYSTEM CHECKOUT), then Enter.
3.
Depending on the options installed in the system, questions about
attached devices may appear on the display.
press Enter.
4.
Press Y or N (IS THE LIST CORRECT (Y/N)?), then Enter.
5.
Press 2 (LOG UTILITIES), then Enter.
6.
Press 0 (START ERROR LOG), then Enter.
7.
Press 0 or 1 (LOG TO DISKETTE, OR PRINTER (0/1)?), then Enter.
8.
If you are logging to diskette, press A (ENTER THE DRIVE ID FOR ERROR
LOG?), then Enter.
9.
Press 9 (END LOG UTILITIES), then Enter.
IBM ThinkPad 500 HMM
Creating the Error Log
Answer as required; then
¦ Copyright IBM Corp. 1993
1.4.5.1 - 1
Advertisement
Table of Contents
