Table of Contents
Advertisement
Our Instruction Manuals are available as free download on our web. For any additional
information and/or assistance, you are welcome to contact our Service Department (see
paragraph 6.5-Customer Support), specifying the serial number of your instrument.
3.3
Before Applying Power
Consider the Power Module (12, see drawing 2), left on the back panel, which encom-
passes – from left to right - the fuse holder & the voltage selector, the mains switch and
the inlet connection of the mains cord:
3.3.1
Mains Switch
This two-pole toggle switch, which complies with international safety standards, provides
a visual cue, meaning:-
OFF
ON
3.3.2
Fuse Holder & Voltage Selector
The fuse holder comprises two fuses, one on the live, and the other on the neutral. For
both operation at 220-230 Volts and at 115 Volts, we recommend 125 mA timed fuses
(type T125). To replace the fuses, see paragraph 6.2.
The fuse holder also embodies the Voltage Selector. Make sure that the flag indicates
the correct voltage (i.e., the voltage of your mains).To change the selected voltage, see
paragraph 6.2.
3.3.3
Mains Cord
It is a standard cable, Cat. # E-WP008. Make sure your power outtake is provided with a
reliable ground connection.
when pressed to the right ("O" side)
when pressed to the left
37215 Instruction Manual (Rev. 4)
("I" side)
Page 5
Figure 3, "Back Panel"
Advertisement
Table of Contents
