Electrolux EHXP8H10KK User Manual page 10

10 www.electrolux.com
4.7 Using the cooking zones
Put the cookware directly on the crosses
or on the flexible cooking zone. Induction
cooking zones adapt to the dimension of
the bottom of the cookware
automatically. Tap the cooking zone
symbol to open the cooking zone panel.
4.8 The heat setting
Touch the symbol of the zone you want
to use. The cooking zone panel appears.
You can change the heat setting by:
• touching the control bar at the correct
heat setting,
• sliding your finger along the control
bar. Release your finger when you
reach the correct heat setting.
• touching the zone symbol and sliding
your finger to the right to increase or
to the left to decrease the heat
setting.
0
For flexible induction
cooking zone first place the
cookware. When the
cookware is detected the
symbol of the zone appears.
4.9 Flexible induction cooking
zone
The flexible induction cooking zone
detects the position and size of the
cookware. When the cookware is
detected the symbol of the zone
appears. You can activate the cooking
zone panel and set the heat setting or
timer functions. The size of the cooking
zone symbol depends on the size of the
cookware. If the symbol is small you can
place additional cookware next to the
one you use.
9
You can use up to three pots on the zone
and operate them separately. The
minimum size of the cookware is 90mm.
The maximum is 300 x 460 mm.
When you remove the cookware from the
zone the symbol of the zone turns gray.
After 10 seconds the zone disappears.
4.10 Split function
If you use a large cookware on the
flexible zone you can divide it into two
cooking zones. This will let you set two
different heating levels for two different
areas of the cookware.
To activate the function: touch the
zone symbol. Cooking zone panel comes
on. Touch
from the list. If the function is not
available in submenu the zone is to small
to be split.
To deactivate the function: touch the
zone symbol. Cooking zone panel comes
on. Touch
unsplit the zone.
If you remove cookware for
more than 10 seconds or
you deactivate the zone, the
function deactivates.
14
To split or unsplit the zone
you can also touch the zone
symbol with two fingers.
4.11 Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function for a cooking
zone: touch the cooking zone symbol.
Set the desired heat setting between 1
and 13. Touch
function comes on inside the cooking
zone symbol:
symbol counts down the remaining
function time.
and choose the function
and choose the option to
. A symbol of the
. The timer next to the