Asus I01WD User Manual page 10

I01WD) are as follows:
•
•
•
The FCC has granted an Equipment Authorization
for this device (ASUS_I01WD) with all reported SAR
levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this device
is on file with the FCC and can be found under the
Display Grant section of www.fcc.gov/oet/ea/fccid
after searching on FCC ID: MSQI01WD.
FCC Statement (HAC)
This phone has been tested and rated for use with
hearing aids for some of the wireless technologies
that it uses. However, there may be some newer
wireless technologies used in this phone that have
not been tested yet for use with hearing aids. It is
important to try the different features of this phone
thoroughly and in different locations, using your
hearing aid or cochlear implant, to determine if
you hear any interfering noise. Consult your service
provider or the manufacturer of this phone for
information on hearing aid compatibility. If you have
questions about return or exchange policies, consult
your service provider or phone retailer.
The Federal Communications Commission has
implemented rules and a rating system designed
to enable people who wear hearing aids to more
effectively use these wireless telecommunications
devices. The standard for compatibility of digital
wireless phones with hearing aids is set forth in
American National Standard Institute (ANSI) standard
C63.19-2011. There are two sets of ANSI standards
with ratings from one to four (four being the best
rating): an "M" rating for reduced interference
making it easier to hear conversations
on the phone when using the hearing aid
microphone, and a "T" rating that enables the phone
to be used with hearing aids operating in the telecoil
NA15096_ZS630KL_UM.indb 10
1.18 W/Kg @1g (Head)
0.93 W/Kg @1g (Body)
1.18 W/Kg @1g (Hotspot)
2019/3/28 14:02:51