Table of Contents
Advertisement
RSP-1572 /RSX-1562
4. Select "115200, 8, None, 1, None" at "Com Port Properties".
5. Select "File" -> "Properties" menu.
And then OK
6. Select "Settings" Tab. And then Select "ASCII Setup..."
7. Check as bellow.
8. Connect RS232 Cable between RSP-1580 and PC. And then RSP-1580 Power On.
RSX-1562 have to Standby mode.
9. At Hyper Terminal Screen, Type "upgrade" and then Enter
10. Displayed as bellow. Type "1"
19
Advertisement
Table of Contents
