Storing Channels In Memory - Samsung HP-R4252 Owner's Instructions Manual

Storing Channels in Memory

Press the ▲ or ▼ button to select the antennas to
4
memorize. Press the ENTER button to select "Start".
In Air, press the ENTER button to start the auto program.
5
In Cable or Air + Cable, press the ENTER button to
select the cable system.
Press the ▲ or ▼ button to select "Digital Channel or
Analog Channel", then select the cable system.
Press the ▲ or ▼ button to select "Start" and press
the ENTER button to start the auto program.
The TV begins memorizing all available stations.
6
Press the ENTER button at any time to interrupt the
memorization process.
Press the EXIT button to exit.
Note
• The TV must be connected to an antenna in
order to receive digital TV signals.
Even if a particular channel is deleted from the
memory, you can always tune to that channel
directly by using the number buttons on the
remote control.
Notes
• All available DTV and analog channels are automatically stored in memory when channels are
selected by directly accessing channels.
• It takes approximately 3 to 10 minutes to memorize channels.
T V Auto Program
Select the antennas to memorize.
Air
Cable
Air + Cable
Move Enter
T V Auto Program
Select the cable system.
Digital Channel : STD
Analog Channel : STD
Start
Move Enter
Auto Program
Auto Program in progress.
Air Channel 67
Stop
Enter
Start
Start
Start
Return
√
√
Return
Return
43