Table of Contents
Advertisement
Press the ▲ or ▼ button to memorize the channels of
3
the selected connection.
Press the ENTER button to select "Start".
Notes
• If the antenna is connected to ANT 1 IN (CABLE IN),
select "Cable" and if it is connected to ANT 2 IN
(AIR IN), select "Air".
• If both ANT 1 IN and ANT 2 IN are connected,
select the "Air + Cable".
• If the CableCARD is inserted into the "CableCARD"
slot on the rear panel, "Cable" and "Air + Cable"
are not available.
When selecting Cable TV :
Press the ▲ or ▼ button to select "Cable" or "Air + Cable",
then press the ENTER button.
Press the ▲ or ▼ button to select "Digital Channel", then
press the ENTER button.
Press the ▲ or ▼ button to select "STD", "HRC", or "IRC",
press the ENTER button.
Press the ▲ or ▼ button to select "Analog Channel", then
press the ENTER button.
Press the ▲ or ▼ button to select "STD", "HRC", or "IRC",
press the ENTER button.
Press the ▲ or ▼ button to select "Start", then press the
ENTER button to memorize the channels.
Note
• STD, HRC, and IRC identify various types of cable
TV systems. Contact your local cable company to
identify the type of cable system that exists in your
particular area. At this point the signal source has
been selected. Proceed to "Storing Channels in
Memory" on page 43.
Plug & Play
Select the antennas to memorize.
Start
Air
Cable
Start
Air + Cable
Start
Move
Enter
Plug & Play
Select the cable system.
Digital Channel
: STD
Analog Channel
: STD
Start
Move
Enter
Plug & Play
Select the cable system.
Digital Channel
:
STD
STD
Analog Channel
: STD
HRC
Start
IRC
Move
Enter
Plug & Play
Select the cable system.
Digital Channel
: STD
Analog Channel
:
STD
STD
Start
HRC
IRC
Move
Enter
Plug & Play
Select the cable system.
Digital Channel
: STD
Analog Channel
: STD
Start
Move
Enter
Skip
√
√
Skip
√
√
Skip
√
√
Skip
√
√
Skip
37
Hide quick links:
Advertisement
Table of Contents
