Table of Contents
Advertisement
WR100 OPERATION MANUAL
9. Trouble shootings
Cannot associate
1.
Please make sure to wait at least one minute after
my device to my
POWER-ON before try to connect your audio device
router
to a router.
2.
Reset your device (Press the RESET key at the back
more than 6 seconds, see page 4) wait one minute,
and try again.
3.
If the audio device was already associated to a Wi-Fi
network and you want to connect it to another net-
work, you must factory reset the device (see above}
4.
Try to associate your audio device using the browser
of a personal computer (see page 6).
I cannot see my
1.
Please make sure your mobile device (mobile Phone/
device in the APP
tablet) is connected to the same network as your de-
vice.
2.
After open the APP, wait 30 seconds to one minute to
see the device, depending the speed of your network.
The system need time to publish the device on the
network becoming recognizable by the APP.
3.
If after try to restart the App and/or the audio device,
checked if all is connected to the same Wi-Fi network
and still cannot see the unit, switch OFF mobile
phone and disconnect the audio device from the
main power and then restart all your system.
Some songs can-
1.
The system does not support the WMA format, if you
not be played
have those songs, please convert it to MP3 first
2.
Some songs bought on music's stores (for example
Apple store) contains restricted rights and cannot be
played.
Cannot see your
Windows 7 and above only: Please check if you allow your
PC on the network
PC to share the contents on the network (right click on
Network in your PC+ share contents).
Cannot play songs
Check if you don't have an active firewall which can block
from the network
the streaming from the PC or from the NAS.
－
15
English
Main Features
• Wi-Fi connection, dual band 2.4 & 5 GHz-2T/2R
• DLNA compatible
• Quick Connect to Home Wi-Fi network function (WPS via WLAN
key)
• Supports Direct Mode (direct access point) or network router con-
nection
• Party mode (Router mode only)
• Multi-zones / Multi-room operation (router mode only)
• Operation: Multi-color LED indicator; 2 keys on back
• Power input: 5V DC - 1A (micro USB connector)
• Power consumption in ON mode : < 5 W
• Standards: CE, ERP2, REACH, ROHS
English
This product operates at 2400 - 2483.5 MHz and is designated only
to be used inside a normal household environment. This product is
suited for this purpose within all EU counties.
Hereby, NuPrime inc. declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/
EC.
The declaration of conformity may be consulted at
HTTP://XXXXXXXXXXXXXXXXXX
WR100 OPERATION MANUAL
－
English
16
Advertisement
Table of Contents
