Table of Contents
Advertisement
WR100 OPERATION MANUAL
4. Get ready
1. Minimum requirements
Android Phone (4.1 minimum) or iPhone (from iPhone 4 with IOS 7.0 and later).
- Router WiFi 802.11n, with WPA2-PSK encryption (AES)
- ADSL or Optical Internet connection
- For Multi-room or High Resolution playing, a 5 GHz multimedia router (speed>
600 Mbps) is highly recommended.
- For the best operation, the router must be placed at the center of the house or
apartment.
2. Download and Install the "NuPrime Audio" App to your mobile phone:
Open an account or use your existing parameters to connect on Google or Apple
stores.
Android Phone : Go to Google Play Store and looking for NuPrime Audio
App, then download it.
iPhone: Go to Apple Store and looking for NuPrime Audio App, then down
load it
Open the file manager and install the App.
3. Create your account:
Tap on "New here? Create your account", fill the fields and create your own
password for the APP. Then register
Enter your activation key the register, the key is located at the back of the Quick
start guide
4. Connect your unit into your internet environment:
Install your unit in a dry and cool place of your living room. Care to place it on a
stable support (not on another electric device producing heat).
Install the unit in a place you are sure to receive the Wi-Fi Signal from your Home
Wi-Fi router.
Connect the device to a 5V DC 1A power adapter. The LED indicator turns to
flashing yellow. Wait the LED turns to flashing white to get your WR100 visible by
other Wi-Fi devices.
Then have several ways to associate your WR100 to your home Wi-Fi Router:
4.1: Connect your device with the "WLAN" key:
－
5
English
Press the WPS key of the router and the WLAN key of the WR100 simultaneously.
The LED is flashing fast (white). After around 10~ 40 seconds, the Wi-Fi LED on the
device becomes permanent white: The unit is connected to your network.
4.2: Connect your device using a browser:
If your router does not have a WPS key, open the WLAN settings on your mobile
phone or on your computer and look for the Wi-Fi network:
Nuprime-WR100_xxxxxx-AJ (xxxxxx depends of your device serial number).
Select and connect to this network.
Open your browser, you will be automatically redirected on the login web page. If
you are not automatically redirected, type in your browser the address:
http://172.19.42.1
Input a friendly name for your unit (this is the name that will be shown on the
app when you will play from your mobile phone), can be Living room, Bedroom,
or whatever.
Select your network name in the scrolling menu, then input your home network
password.
Click on "Connect", your device is looking for your home network, when con-
nected the Wi-Fi LED will turn to permanent white.
WR100 OPERATION MANUAL
－
English
6
Advertisement
Table of Contents
