Table of Contents
Advertisement
WR100 OPERATION MANUAL
5.7. Multi zones:
If several audio devices (speakers, audio adapters) are connected simultaneously on your
home Wi-Fi network, you can play indifferently a song on speaker 1 and another song on
the speaker 2 from any mobile device connected to the network.
6. Multi-room operation( Party mode, or stereo)
Multi-room need two or more audio devices (up to 10 if your network can support 300
Mbps speed), the recommended operation being 2 to 4.
Notea: 1. All speakers and audio adapters must be connected on the same Wi-Fi network.
2. The speed of the network is very important to benefit of the Multi-room function. If more
than two audio devices are connected, the usage of a 5GHz multimedia router is recom-
mended. From 4 audio devices connected, this is highly recommended.
3. To play High Resolution songs (HR), you imperatively need to use a multimedia router
and connect all audio devices and your mobile device in 5 GHz band. The Number of
speakers and audio adapters which can be used in HR depends from the performances of
your network. It's recommended to not group more than 2 audio devices.
a.
Press the speaker logo on the top of the screen to display the devices list:
－
11
English
b.
1
2
Press the "group button", and select the audio devices you want to group. Then
press "OK"
c.
Select the group and operate as a single speaker.
d.
When touch the volume control a new screen appears allowing to adjust the vol-
ume of the speakers independently. Close this screen by pressing the symbol:
6. Settings
Press this buttons to access to system settings. In this section, you can access to various
system options like:
Rename your audio device
Restart the app or a device
Check the signal received by the audio device
Check the IP address assigned to the audio device by your home router
Assign a password to an audio device
Check if a new firmware is available for your audio device
WR100 OPERATION MANUAL
－
English
12
Advertisement
Table of Contents
