Honda CRF250R 2018 Owner's Manual page 69

Clutch System
Clutch Disc/Plate Removal
1. Drain the engine oil (page 52).
2. Remove the clutch cover A bolts (1), washer
(2) clutch cover B bolts (3) and clutch cover
(4).
(1)
(2)
(4) (3)
(1) clutch cover A bolts (3) clutch cover B bolts
(2) washer (4) clutch cover
3. Remove the five clutch spring bolts and
springs (5).
Loosen the bolts in a crisscross pattern in two or
three progressive steps.
64
Servicing Your Honda
4. Remove the clutch pressure plate (6).
(5)
(5) clutch spring bolts and springs
(6) clutch pressure plate
5. Check the operation of the bearing (7) with
your finger. The bearing should turn smoothly
and quietly.
(7) bearing
If the operation is not smooth, refer to an official
Honda Service Manual (page 166) for bearing
disassembly or see your dealer.
6. Remove the clutch lifter (8) first, then remove
the clutch lifter rod (9).
(6)
(8)
(8) clutch lifter
7. Remove the eight clutch discs, seven clutch
plates, judder spring and spring seat (10).
(7)
(10) clutch discs, clutch plates, judder spring and spring
seat
(9)
(9) clutch lifter rod
(10)