Honda CRF250R 2018 Owner's Manual page 45

Subframe
7. Connect the starter/ignition relay connector
(18) and install the seat support base (19).
8. Install and tighten the collars (20), and seat
support base mounting bolts (21) to the
specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
(19)
(21)
(20)
(18) starter/ignition relay connector
(19) seat support base
(20) collars
(21) seat support base mounting bolts
9. Install the left and right mufflers (page 116).
40
Servicing Your Honda
10. Slide the shroud (22) toward the down so that
the shroud tab (23) and the slot (24) on the air
cleaner housing cover (25) is aligned.
11. Install the shroud C bolt (26), B bolt (27) and
shroud A bolt (28).
Tighten the shroud A and B bolts to the
specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
Tighten the shroud C bolt to the specified
torque:
3.8 lbf·ft (5.2 N·m, 0.5 kgf·m)
The right and left shrouds can be installed in
(20)
the same manner.
(26)
(27)
(18)
(28)
(22) shroud
(23) shroud tab
(24) slot
(25) air cleaner housing cover
12. Install the seat (page 33).
(22)
(25)
(23)
(24)
(26) shroud C bolt
(27) shroud B bolt
(28) shroud A bolt