Wheels - Honda CRF250R 2018 Owner's Manual

Refer to Important Safety Precautions on page 23.
Keeping the wheels true (round) and maintaining
correct spoke tension are critical to safe
motorcycle operation. During the first few rides,
spokes will loosen more rapidly due to the initial
seating of the parts. Excessively loose spokes may
result in instability at high speeds and the possible
loss of control. It's also important that the rim
locks are secure to prevent tire slippage.
Wheel Rims & Spokes
1. Inspect the wheel rim (1) and spokes (2) for
damage.
2. Tighten, any loose spokes and rim lock (3) to
the specified torque:
Spokes: 2.7 lbf·ft (3.7 N·m, 0.4 kgf·m)
Rim Lock: 9 lbf·ft (12 N·m, 1.2 kgf·m)
3. Check wheel rim runout. If runout is
noticeable, see an official Honda Service
Manual for inspection instructions.
(3)
(1)
(1) wheel rim (3) rim lock
(2) spokes
Axles & Wheel Bearings
See an official Honda Service Manual for
inspection information:
1. Check the axle shaft for runout.
2. Check the condition of the wheel bearings.
(2)

Wheels

109
Servicing Your Honda