Makita Makstar BTD200 Technical Information page 4

C
ircuit diagram
Brush Holder
Red
Black
W
iring diagram
Brush holder lead wire
(Black)
Lead wire of speed change
switch (white) must not be
loosen in this area.
Fix lead wire of speed change
switch (white) with lead holder.
Terminal
Speed change switch
FET
Bruch Holder
M2 M1
Switch
Black
White
Speed Change
Black
Switch
Orange
Terminal
Brush holder lead wire
(Red)
Fix the following lead wires
with lead holder.
1 Switch lead wire (Orange) to be
connected to terminal
2 Switch lead wire (Black) to be
connected to terminal
3 Lead wires of speed change switch
(Black and White)
The above lead wires have to be fixed
with lead holder as illustrated in the
following Fig.
P 4 / 4
Switch side
Lead
holder
3
2 1
Terminal side
Lead wires of speed change
switch (black and white)
must not be loosen in this area.