Notes On The Documentation; Product Description; Ce Marking; Energy Saving Trust Endorsed Products - Vaillant ecoTEC sustain 24 Installation And Maintenance Instructions Manual

4

Notes on the documentation

▶
Always observe all operating instructions enclosed with
the installation components.
▶
Store these instructions and all other applicable docu-
ments for further use.
These instructions apply only to:
Product article number
ecoTEC sustain 24 VUW 246/7-2 (H-
GB)
ecoTEC sustain 28 VUW 286/7-2 (H-
GB)
ecoTEC sustain 34 VUW 346/7-2 (H-
GB)
Gas Council Numbers
ecoTEC sustain 24 VUW 246/7-2 (H-
GB)
ecoTEC sustain 28 VUW 286/7-2 (H-
GB)
ecoTEC sustain 34 VUW 346/7-2 (H-
GB)
5

Product description

5.1

CE marking

The CE marking shows that the products comply with the
basic requirements of the applicable directives as stated on
the declaration of conformity.
The declaration of conformity can be viewed at the manufac-
turer's site.
5.2

Energy Saving Trust Endorsed Products

Only the most energy efficient products can carry the
'Energy Saving Trust Endorsed Product' brandmark making
it easy for consumers to choose products that have met strict
energy performance criteria.
Available for: Boilers, Heating controls and chemical inhib-
itors, the Energy Saving Trust endorsed product brandmark
gives consumers confidence that a product will cost less to
run, help lower energy bills and reduce carbon emissions.
About the Energy Saving Trust
Energy Saving Trust is an independent and impartial organ-
isation that provides trusted energy saving advice to em-
power millions of people to lead affordable, low energy life-
styles. For more information visit energysavingtrust.org.uk
0020253094_05 ecoTEC sustain Installation and maintenance instructions
5.3
The identification plate is mounted on the underside of the
product in the factory.
The identification plate keeps record of the country in which
the product is to be installed.
Information on the
identification plate
Condensing techno-
0010019980 logy
Serial number
0010019981
0010019982
47-044-79
... ecoTEC ...
47-044-80
Cat.
Type: Xx3(x)
47-044-81
2H / 2E / 3P / 2K...
Tmax
PMS
NOx
V
Hz
W
IP
Code (DSN)
Qn
Pn
Pnc
Qnw
Pnw
D
PMW
GC No.

Information on the identification plate

Meaning
Efficiency class of the boiler in accord-
ance with EC Directive 92/42/EEC
For quality control purposes; 3rd and 4th
digits = year of production
For quality control purposes; 5th and 6th
digits = week of production
For identification purposes; 7th to 16th
digits = product article number
For quality control purposes; 17th to 20th
digits = place of manufacture
Product designation
Approved gas category
Permissible flue gas connections
Gas group and gas connection pressure
as set at the factory
Max. flow temperature
Maximum water pressure in heating
mode
NOx class for the product
Electric connection
Max. electrical power consumption
Protection class
Specific product code
Heating mode
Nominal heating load range in heating
mode
Nominal heat output range in heating
mode
Nominal heat output range in heating
mode (condensing technology)
Hot water generation
Nominal heating load range in hot water
handling mode
Nominal heat output range in hot water
handling mode
Specific flow rate
Maximum water pressure in hot water
handling mode
Barcode with serial number
Gas council number
Note
Make absolutely sure that the product is compat-
ible with the gas group at the installation site.
11