Turning Your Phone On And Off - Samsung Seek SPH-M350 Online User's Manual

Status Bar – Status Icons
Ringtone & Vibrate
Levels 1 - 8 and device is set to Always Vibrate (Main >
Settings/Tools > Settings > Volume).
1 Beep with Vibration
1 and vibrate.
Vibrate All – The ringer is set to vibrate only.
Silence All – All incoming sounds are turned off.
Alarm – An upcoming alarm event is scheduled.
Bluetooth Active
active and enabled.
Bluetooth Searching
available (visible) Bluetooth devices.
Bluetooth Connected
connected to a wireless headset.
14 2A. Phone Basics
– Ringtone volume is set between
– Ringtone volume is set to Beep-
– Bluetooth technology is
– Phone is searching for
– Bluetooth device is
Status Bar – Messaging Icons
Message Indicator
messages. (It also indicates when you have a
missed call, a voicemail message, Calendar
event, Alarm, Email, Picture Mail, or Text
Message.)

Turning Your Phone On and Off

Turning Your Phone On
Press , located at the side of the phone.
When your phone finds a signal and an available
network, you are ready to begin making and receiving
calls.
If your phone is unable to find a signal after 15 minutes
of searching, a Power Save feature is automatically
activated. When a signal is found, your phone
automatically returns to standby mode.
– You have new text