Specific Absorption Rates (Sar) For Wireless Phones; Fcc Radiofrequency Emission; Owner's Record - Samsung SPHI600 User Manual

Specific Absorption Rates (SAR) for Wireless Phones

The SAR is a value that corresponds to the relative amount of RF
energy absorbed in the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing,
measuring and calculation process. It does not represent how much RF
the phone emits. All phone models are tested at their highest value in
strict laboratory settings. But when in operation, the SAR of a phone
can be substantially less than the level reported to the FCC. This is
because of a variety of factors including its proximity to a base station
antenna, phone design and other factors. What is important to
remember is that each phone meets strict federal guidelines. Variations
in SARs do not represent a variation in safety.
All phones must meet the federal standard, which incorporates a
substantial margin of safety. As stated above, variations in SAR values
between different model phones do not mean variations in safety. SAR
values at or below the federal standard of 1.6 W/kg are considered safe
for use by the public.
The highest reported SAR values of the Sprint PCS Vision Smart Device
SP-i600 by Samsung are:
PCS mode (Part 24):
Head:

FCC Radiofrequency Emission

This phone meets the FCC Radiofrequency Emission Guidelines.
FCC ID number: A3LSCHI600. More information on the phone's SAR
can be found from the following
FCC Website: http://www.fcc.gov/oet/fccid.

Owner's Record

The model number, regulatory number and serial number are located
on a nameplate inside the battery compartment. Record the serial
number in the space provided below. This will be helpful if you need
to contact us about your phone in the future.
Model: Sprint PCS Vision Smart Device SP-i600 by Samsung
Serial No.:
50
0.97
W/kg; Body-worn:
0.52
W/kg