HORNER APG SmartMod HE359DIQ512 Step-By-Step Manual page 5

MAN0922-01-EN
8. Click Add and setup (Fig. 5).
1. Select device from drop down list. Bracketed number indicates Node
ID.
2. Starting register. (Holding registers are appropriate)
3. Up to 8 registers are required for the HE359DIQ512
4. The starting register (%R) in the XLt where the data will be mapped.
5. Polled Read/Write as changes can be made to settings in the
SmartMod
9. Select OK, OK, OK to return to Cscape main window
____________________________________________________________________________________
Page 5 of 14
Fig. 5
SmarMod Quick Start Guide
1017