Configuring your Phone's Connections
Your phone is wirelessly connecting to the Internet via a built in
WAP browser. Connection can be made via any of the available
WAP browsers: MEdia Net, AT&T MMS (MultiMedia Server), and
AT&T IMS. You need these settings to use the web browser or
send MMS messages or e-mails.
Use this menu to create and customize the profiles containing the
settings for connecting your phone to the network. Although the
active connection can be changed by the user, it is recommended
that this choice be made with the assistance of either the retailer
or customer service representative.
At the Idle screen, select Menu
1.
➔
Connectivity
Connections and press the
Up or Down Navigation key to highlight one of these
options and press the
• MEdia Net
• AT&T MMS
• AT&T IMS
Important!: The MEdia Net is pre-configured and cannot be altered on this
screen. The AT&T MMS connection option can be edited,
renamed, or deleted on this screen. Your phone is set up by
default for connecting to the network. If you change the settings
127
➔
➔
Settings
Set
key. Use the
key:
without first checking with your service provider, the web
browser, MMS, and e-mail features may not work properly.
To create a new connection, press the Options soft key,
2.
select New, and press the
To edit the existing AT&T MMS, highlight this entry, press
3.
the Options soft key, select Edit, and press the
Select the parameter you want to edit:
4.
• Set Name: enter a profile name.
• Access Name: edit the access point name.
• Auth Type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to the
network.
• Protocol: set the connection protocol used by the WAP browser:
WAP, HTTP, or Other.
• Home URL: enter the URL address of the page to be used as your
homepage.
• Proxy address: set the proxy server address and port.
• Linger Time (Sec.): sets a time period (in seconds) after which the
network is disconnected if there is no new data traffic.
key.
key.