Allegion SCHLAGE MTB15 Installation Instructions Manual

*P519-096*
P519-096
Single Gang Reader
1
Locate and/or install single gang box.
Consult manufacturer's instructions for installation.
2
Complete the wiring. Wire the cable to the control
module.
Wiring methods shall be in accordance with the National Electrical Code
(ANSI/NFPA70), CSA 22.1, Canadian Electrical Code (CEC), Part I, Safety
Standard for Electrical Installations, local code, and the authorities having
jurisdiction. A shielded cable must be used.
A power limited, class 2 UL 294 approved power supply must be used.
Voltage rating 5VDC to 28VDC.
Total length Gauge to power supply
to power supply or (power & ground wires)
to panel
Power supply voltage
12 VDC
100 ft (30.5 m)
200 ft (61 m)
300 ft (91.5 m)
400 ft (121.9 m)
500 ft (152.4 m)
600 ft (182.9 m)
700 ft (213.4 m)
800 ft (243.8 m)
900 ft (274.32 m)
1000 ft (305.8 m)
MTB15, MTKB15
Gauge to panel
(all other wires)
24 VDC
22 22
22 22
20 22
18 22
18 20
18 20
18 20
16 18
16 18
- 18
Support and Warranty
us.allegion.com
(877) 671-7011
+1 512-712-1316
Allegion Address
3899 Hancock
Expressway
Security, CO 80911
Input
Voltage
(VDC)
5
12
24
28
The max run for a 5V supply is 50 ft (15 m) with 18 AWG.
* Tamper Outputs are to be connected to a UL-Rated Burglary System.
3
Route cable through box.
22
22
22
22
22
22
22
22
22
22
Installation Instructions
For Indoor/Outdoor Use
Mobile Enabled Multi-
MTB15
Technology Reader
Mobile Enabled Multi-
MTKB15 Technology Reader with
keypad
Tools
• Phillips Screwdriver
• 6-32 Tap
• 1" (25 mm), Z\," (3 mm) Drill Bits
• T10 Security Torx Screwdriver
(Optional)
Cable Connections
Black Ground
Blue Unused
Red LED Control
Brown
Tamper Out
Gray*
Wiegand Data 0 / Data
Green
Green LED Control
Orange
RS485-A/Y
Pink
Power In
Red
Shield Ground
Shield
RS485-B/Z
Tan
White Wiegand Data 1 / Clock
Yellow Beeper Control
Estimated Current Draw
MTB15
Avg. mA Max. mA Avg. mA
145 310 145
80 190 80
45 100 45
40 85 40
MTKB15
Max. mA
320
200
105
90