Quick View; Start Up Image; Sound Volume; Operation Sound - Samsung NV10 User Manual

Setup menu

[ Quick view ]

If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
Sub menus
[Off] : The quick view function can't be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.

[ Start up image ]

You can select the image that is first displayed on the LCD monitor whenever
the camera is turned on.
Start up image : [Off], [LOGO], [User Image]
- Use a saved image for the start-up image with the
[START IMAGE] in the [RESIZE] menu in the play
mode.
- The start-up image will not be deleted by [DELETE]
or [Format] menu.
- The User images will be deleted by [Reset] menu.

[ Sound Volume ]

You can select the sound volume of start sound, operation sound and shutter
sound.
[Sound Volume] sub menus : [Off], [Low], [Medium],
Off Imprint
0.5 sec LCD
1 sec AF Lamp
3 sec Power Off
Quick View
Exit:BACK

[ Operation Sound ]

If you set sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.
[Sound] sub menus : [Off], [Sound 1], [Sound 2],
Off Start Image
LOGO Sound Volume
User image BEEP Sound

[ Start up sound ]

Start Sound
Shutter Sound
You can select the sound that is activated whenever the camera is turned on.
Exit:BACK
Start up sound : [Off], [Sound 1], [Sound 2],
- If the start up image is set to [Off], the start up
sound will not activate, even though you may
have set these to on.
[High]
[Sound 3]
[Sound 3]
Off Start Image
Low Sound Volume
Medium BEEP Sound
High Start Sound
Shutter Sound
Exit:BACK
Off Start Image
Sound 1 Sound Volume
Sound 2 BEEP Sound
Sound 3 Start Sound
Shutter Sound
Exit:BACK
Off Start Image
Sound 1 Sound Volume
Sound 2 BEEP Sound
Sound 3 Start Sound
Shutter Sound
Exit:BACK
51