Beat Junior User Manual page 3

Bass drum pedal assembly instructions
Floor tom assembly instructions
English
4) Insert the bass drum beater into the
top of the pedal and tighten the wing
screw.
5) Insert the pedal into the bottom of the
bass drum rim. The base of the pedal will
go beneath the bass drum and the clamp
will go over the top of the rim. Use the
T-handle to fasten the pedal onto the rim.
Make sure it is aligned evenly between
the two bottom tension rods.
6) For the floor tom take the two drum
heads and use the same principals as
indicated in steps 1, 2 noted above. You
will place the chrome rim on the head of
the drum, then insert the key rods thru
the holes of the rim and into the lugs on
the drum.With the floor tom sitting
upside down, insert the three floor tom
legs thru the brackets and tighten them
in using the T-handle.