Beat Junior User Manual page 2

English
Bass drum assembly instructions
1) Place the Bass Drum flat on the floor to
attach the heads and hoops You will want
to seat the Beat logo head on the front of
the bass drum, closest to where the spurs
will be on the shell. Place the hoop on top
of the head and make sure it sits evenly.
2) Bass tension rods are longer in length
than the floor tom rods. Place them thru
the claw hooks, then place the claw hooks
on the hoop straight in line with the bass
drum lug. Hand tighten the tension rod
into the lug; repeat all the way around the
drum. After you have hand tightened all
of the tension rods, use the drum key to
apply more tension to the head.
3) Insert one bass drum spur on each side
and hand tighten them with the T-handle
located on the bracket.