Hasselblad Stellar II Wireless Connection Manual

Wi-Fi Connection /
One-touch (NFC) Guide
*NFC: Near Field Communication
Notes
• The Wi-Fi function of this camera cannot be used
connected to a public wireless LAN.
PlayMemories Mobile is not guaranteed to work on
all Smartphones and Tablets.
• To use the One-touch functions (NFC) of the camera,
a smartphone or tablet computer supporting the
NFC function is required.
What you can do

Sending images to the computer

Sending images to the computer
Note: Steps 1 and 2 are required the first time only.
1 Install the latest software on your computer.

Required equipment/environment

2 Connect the camera to an access point.
The computer connected to a
wireless access point

See the description on the right.
If the wireless access point has a WPS button.

Sending images to a smartphone
(One-touch sharing (NFC)

Required equipment/environment
A smartphone or a tablet computer

See the reverse side.
Using a smartphone as a remote
controller (One-touch remote (NFC))

Required equipment/environment
3 If your computer is not running, start it up.
A smartphone or a tablet computer

See the reverse side.
4 Start sending images to the computer.


Viewing still images on a TV


Refer to the Wi-Fi guide of the website.
Windows Link
Note: For more information, refer to the instruction of the access point, or contact the person who set up the access point
Press the MENU button.
 
Select 3 with [WPS Push].
Push the WPS button on the wireless access point you want to register.
Confirm that a memory card is inserted in the camera.
Note: Previously sent images are not duplicated. Sending multiple still images takes time.
Before using wireless transfer, the camera needs to be paired with the computer via the USB cable.
PC: PlayMemoriesHome will automatically prompt to perform the pairing.
MAC: Run WAI and click the [Set]-button. Follow the on screen instructions.
Mac Wireless Auto Import*
If you know the SSID and password of your wireless access point.

Press the MENU button.
Menu
 

Select 3 with [Access point settings].

Select the access point you want to register, enter the password, then press [OK].
 
Press the MENU button.
Menu
Link
Menu
 
Select 1 with [Send to computer].
• Image saving automatically starts.