Starting Pc Mode - Samsung DIGIMAX L70 User Manual

Setting up the application software
5. After restarting the computer, connect the PC to the
camera with the USB cable.
6. Turn on the camera power.
The [Found New Hardware Wizard] will
open and the computer will recognise the
camera.
※ If your OS is Windows XP, an image
viewer program will open.
If the download window of Digmax Master
opens after starting Digimax Master, the
camera driver was set up successfully.
INFORMATION
● If you have installed the camera driver, The [Found New Hardware Wizard]
may not open.
● On a Windows 98 or 98 SE system, the Found New Hardware Wizard
dialog box opens and a window asking you to select a driver file may
appear. In this case, specify "USB Driver" in the CD supplied.
《64》

Starting PC mode

•If you connect the USB cable to a USB port on your PC and then turn on the
power, the camera will automatically switch to "computer connection mode".
•In this mode, you can download stored images to your PC through the USB
cable.
•The LCD monitor is always turned off in PC mode.
■ Connecting the camera to a PC
1. Press the Setup menu button and press the F4 menu button.
2. Select the [USB]-[Computer] menu by using the smart button.
3. Connect the PC to the camera with the USB cable.
Format
Video Out
USB ◀
Reset
MODE
Set:MENU
Computer
Printer
Exit:M