Page 2
Table of contents 1. REPLACEMENT OF THE SYNCHRONISATION, CONTROL AND MEASURING MODULE (SCM 4.X) ............................3 ........................ 3 ENERAL INSTRUCTION SCM 4.1 .................... 3 EPLACEMENT OF MODULE SCM 4.2 .................... 5 EPLACEMENT OF MODULE DEIF A/S Page 2 of 5...
Page 3
Please let us know if you do switch modules permanently, this will help us keep our records updated. Call us or send a fax to DEIF A/S, for the attention of the service department: Tel.: + 45 9614 9614 Fax: +45 9614 9615 ...
Page 4
DM-4 Land/DM-4 Marine 4189340468B Replacement Instructions, SCM 4.X Address switch on the SCM module Handle: For replacement, please notice that the replacement unit is given the same I/O address as the unit to be replaced. DEIF A/S Page 4 of 5...
Page 5
The OPR-1 can be replaced if needed. This is easily done, placing the module front down and removing the screws. Before reinserting the module, check the interconnection between the two PCBs (8-wire connection). DEIF A/S reserves the right to change any of the above. DEIF A/S Page 5 of 5...
Need help?
Do you have a question about the Delomatic 4 Series and is the answer not in the manual?
Questions and answers