Daylight Saving Time; Auto Adjust; Present Time - Samsung DVD-VR350M Instruction Manual

12:00
Clock Set
List Time Zone
Daylight Saving Time : Off Auto
Timer

Auto Adjust

: Off
On
Guide Off

Present Time

: --- --.--.---- --:--
Dubbing
Disc
Setting
Setup
> Move s Ok r Return e
12:00
Clock Set
List
Time Zone
Daylight Saving Time : On
Timer
Auto Adjust : Off On
Guide
Present Time : Off Off
Dubbing
Disc
Setting
Setup
> Move s Ok r Return e
12:00
Clock Set
List Set the time and date.
Timer
Day Month Year
Guide
01 01 2007 Mon
Dubbing
Hour Min
Disc
Setting
12 : 00
Setup
> Move s Ok r Return e

Daylight Saving Time

To setup, follow steps 1~3 in page 23.
4. Press the ▲▼ buttons to select Daylight Saving Time, then press OK
button.
5. Select the Auto, On or Off using the ▲▼ buttons, then press the OK
button.
If you select Auto, then Daylight Saving Time will change automatically
when it is time to change the data.
Exit
Auto Adjust
Turns on the Auto Adjust function when a channel in your local area
broadcasts a time signal.
The Auto Adjust function is activated whenever the recorder is turned off .
To setup, follow steps 1~3 in page 23.
4. Press the ▲▼ buttons to select Auto Adjust, the press the OK button.
5. Select the Off or On using the ▲▼ buttons, then press the OK button.
Exit
M

If the recorder does not receive a time signal from any station,
"Auto Adjust" returns to "Off " automatically and the display for
setting the clock manually appears. See "Present Time" below.
Present Time
To setup, follow steps 1~3 in page 23.
4. Press the ▲▼ buttons to select Present Time, then press the OK
button.
Use the ▲▼◄ ► buttons to input Time, Date or Year.
Use number buttons to input clock data directly.
5. Press the OK button, then the date and time will be saved.
Exit
If you don't press the OK button, it will not be saved.
M

You must have the RF cable connected to set the Auto Adjust.
(See page 17)

The DVD Recorder & VCR automatically sets the clock according to the
time signal broadcast between the channels PR1 to PR5. If there is no
clock in the analogue broadcast, the clock will be searched
automatically in the DVB-T. If you do not need the Auto Adjust
function, select Off .

If there is a diff erence between the time information of analogue
and the one of digital, you may not be available to the contents of
DVB-T normally.
English - 24