Time Alarm - La Crosse Technology W88723v2 Quick Start Manual

T I ME A L A R M
1. Hold the ALARM button for 3 seconds to enter alarm time set mode. The alarm hour will flash. Press
the + or - buttons to set alarm hour
2. Press the ALARM button to confirm and move to the minutes. The alarm minutes will flash. Press the +
or - buttons to set the minutes.
3. Press the ALARM button to confirm and move to snooze duration. The snooze time will flash and start
at the pre-set of 10 minutes. The date area will read "SNOOZE". Press + or - buttons to set snooze
duration. Increase or decrease in 5 min intervals up to 120 min.
4. Press and release the ALARM button to confirm and exit.
Note: The alarm is crescendo sound. When the alarm sounds, it continues for 2 minutes and then shuts
off completely.
HOUR
Deactivate/Activate Alarm:
1. From normal time display, press and release the ALARM button to activate or deactivate alarm.
2. Alarm time will show for 3 seconds (with or without bell icon). Everything else disappears on screen.
3. Alarm icon will show when active and disappear when deactivated.
• Alarm icon will flash when alarm sounds.
• When alarm sounds, press any button except for LIGHT/SNOOZE to stop ringing for one day
ACTIVE ALARM
Wireless Alarm Clock
MINUTES SNOOZE DURATION (5-120)
INACTIVE ALARM
Page | 5