Rowenta ACCESS FRESH AIR PLATINIUM EP8992F0 Manual page 5

Table of Contents

Advertisement

Available languages

Available languages

6-PEELING
Peeling will enable you to limits growth of subcutaneous hair if practised regularly.
We strongly recommend that you use the Exfoliator Head 2 days after
using your
epilator to avoid irritating your skin.
• And not to use a peeling gel or cream at the same time.
• Never carry out peeling on sensitive areas (armpits / bikini line / face).
• After peeling, we advise you to wipe over the area with a moist flannel
to remove any dead skin. Dry the skin thoroughly afterwards.
• Method :
- Press the release button to remove the epilator head.
- Clip the Exfoliator Head to the epilator.
- Set the switch to "1" .
- Start exfoliating with a slow, gentle up and down movement.
When using the Micro-Peeling function for the first time or if your skin is very
delicate, we recommend:
1. skin is wet before peeling, use cotton wool or a flannel to do this
2. making slow and gentle rotating movements when using the appliance
3. not to use the appliance more than twice on the same area.
• Replacing the exfoliating band
- Press the release button to remove the Exfoliator Head from the epilator.
- Using the plastic end of the cleaning brush unclip the band as follows:
1. Turn the Exfoliator Head over and hold it in place by gripping the edges between your
thumb and forefinger.
2. Turn the band so that its groove comes round to the central position.
3. Insert the end of the cleaning brush in the groove and push to eject the band.
4. Insert the new band by slotting the fins (b) of the exfoliator unit in the groove of the
band and pushing until it clicks!
a
5
b

Advertisement

Table of Contents
loading

Table of Contents