Service Mode - Panasonic HDC-HS100P Service Manual

6 Service Mode

1. Indication method of the service menu
Set the mode dial "HDD Recording" mode.
2. While keep pressing the "[LEFT<] of cursor" button and "delete" button, hold down the Mode Select Switch towards to
"[FOCUS]" position for more than 3 seconds until the top screen of the Service Menu being displayed.
Service mode menu
Screen display
1
2
4
10
14
NOTE:
Do not using service mode except above table of Service Menu.
3. End method of the top screen of the service menu
Push the menu button to end the service mode, and then POWER OFF.
Contents
Factory settings
Drive information display
Lock search history indication
Self check execution
HDD hardware test
Function
Function to throw a product up in a factory shipment state
(When recorded data in HDD, "error display" is done)
Fall detection frequency of HDD, Frequency that exceeds high-
est/lowest operation guarantee temperature and serial number
display
Display an error cord for three histories saved in EEPROM
Function to check self as for the state of HDD
Function to confirm state of HDD hardware
21