1. Introduction A50 is a WiFi and Bluetooth 5.0 amplifier. Adding A50 to your current stereo system will enable you to stream music from your smart device, USB, NAS or streaming services, such as Spotify,Tidal or Qobuz etc by 4STREAM App, AirPlay, Bluetooth or other DLNA apps. Adding more units to your home audio system can set up a wireless multiroom or multizone whole house audio system, it will give you totally new and great experience to play and enjoy your music.
3. Main Features - 50Wx2CH@4ohm,35Wx2CH@8ohm full digital amplifier. - Streaming music via network without distance limitation or Bluetooth5.0 up to 15 meters. - Bluetooth for true high resolution music. - Spotify connect, Airplay, Qplay, DLNA, UPnP streaming protocols supported. - Support streaming source from online services, smart device memory, USB pen drive, NAS, Bluetooth and line in.
4. Specification Wireless network IEEE802.11 b/g/n 2.4G Connectivity Single 10/100M RJ45 Bluetooth USB Host Play USB music Frequency Response 20Hz to 20kHz Power Input 24V/4.16A Audio Input USB 2.0, Analog RCA Audio Preout Analog RCA 24V 8ohm 35W *2 Speaker Power 24V 4ohm 55W *2 Speaker Impedance 4-8 ohms...
5. Interface B LED: to show the device status. C IR receiver: for remote control. D Bluetooth antenna: Used to pair with mobile devices using a popular wireless service. E WPS: Used to activate the device hotspot when necessary. F Line input: Analog input used to connect audio devices via an RCA cable. G Line output: Analog pre-audio output to other devices.
7. Connection diagram 8. How to use 8.1 App download Download the 4STREAM application from App Store for iOS based devices and Google Play Store for Android based devices. The application supports English, Spanish, French, German, Italian, Portugese, Korean, Simplified Chinese, Traditional Chinese and Japanese...
8.2 Connection 8.2.1 Option 1 - Connection via app 1. Power the device. 2. Connect your mobile devices to your network. 3. Go for mobile device WLAN settings> Connect mobile device to hotspot SoundSystem_xxxx you will see a WiFi logo .(short press the reset button if the hotspot is not found) 4.
*Attention for Android users Different brand mobile phones may ask you to allow to use SoundSystem WiFi network ,please choose yes, if not ,you may not able to set up successfully . 8.2.2 Option 2 - Connection via LAN 1. Plug in the wired cable to the RJ45 Ethernet, the device will show on the app in about 10 seconds. (Note: the cell phone and the device must be in the same network) 8.2.3 Option 3 - Bluetooth pair 1.
8.3 App features 8.3.1 Device setting Rename:to customize the device name Speaker info: you will see the device information like Mac ID,device,IP, SSID etc EQ: open to control the device bass and treble Preset content: you will see all the preset contents here Sleep timer: Countdown to stop the music 8.3.2 To play local storage music...
8.3.3 To play music from NAS Please note that our system only support NAS with DLNA feature. 8.3.4 To play line in mode - Connect the AUX cables to the TV or other audio sources - Choose line in mode on the application or remote control 8.3.5 To play Bluetooth mode - Choose the Bluetooth mode on the application or remote control, the LED will change to blue - Open the Bluetooth on your cellphone/tablet...
8.4 Streaming services To use the online streaming services, iHeartRadio, Spotify, Tidal, Qobuz and Deezer may need to register account at the service provider platform. 8.4.1 Spotify To use Spotify, you have to own spotify premium account . You will find the device in the device list on the Spotify application and choose the device you want to play. NOTE: one Spotify account can only streaming to one device at a time.
8.4.2 AirPlay The device supports AirPlay1, you can choose the AirPlay and play music 8.4.3 Qplay Our devices support QQ music using the Qplay protocol, you have to turn on the Qplay in the QQ music player setting and then find the device in the Qplay list.
8.5 Multiroom and Multizone Users can group multiroom and multizone on the Application, for example you can group device 1,2,3 and 4 together and play same music in sync, or group device 1 and 2 as zone A and device 3 and 4 as zone B, and play different music in zone A and zone B.
8.6 Left and right channel Users can choose the right channel or left channel or stereo mode on the application, or choose left channel on device A and choose right channel on device B, and group them together and play in sync to make stereo.
8.10 Firmware update The application will notify you in app when there is a new fireware version available.It's recommended to update fireware whenever available as this might not only correct bugs or improve security,but also can add new features or services. 9.
9.2 To play music from Windows PC via Foobar2000 Our devices support UPnP protocol, with the popular foobar2000, you can play music from Windows PC to our devices. Please follow the steps below: 1. download the foobar2000 and install it. 2.
Page 21
Scan the QR codes below for more www.arylic.com 4STREAM App Facebook: arylicme YouTube:Arylic Support and After Service : info@arylic.com...
Q: Do your devices support airplay and third-party DLNA apps? A: Yes. They support airplay and third-party apps like BubbleUPNP... Q: How many zones can you group in one system? A: 12 rooms is the maximum, while 8 zones are recommended. Q: What distance can your wireless audio system cover? A: Once the system is connected to your WiFi router, you can stream your music anywhere there is a WiFi signal.
Page 24
The information contained in this guide is believed to be accurate and reliable. Arylic assumes no responsibility for any errors contained in this guide. Arylic reserves the rights to make changes in the specifications and/or design of the above mentioned product without prior notice. The diagrams contained in this guide may also not fully represent the product that you are using and they are for illustration purposed.
1. Einführung A50 ist ein WiFi- und Bluetooth 5.0-Verstärker. Wenn Sie den A50 zu Ihrem aktuellen Stereosystem hinzufügen, können Sie Musik von Ihrem intelligenten Gerät, USB, NAS oder Streaming-Diensten wie Spotify, Tidal oder Qobuz usw. über 4STREAM App, AirPlay, Bluetooth oder andere DLNA-Apps streamen.
3. Hauptmerkmale - 50Wx2CH@4ohm,35Wx2CH@8ohm volldigitaler Verstärker. - Streaming von Musik über Netzwerk ohne Entfernungsbeschränkung oder Bluetooth5.0 bis zu 15 Meter. - Bluetooth für wirklich hochauflösende Musik. - Spotify-Verbindung, Airplay, Qplay, DLNA, UPnP-Streaming-Protokolle werden unterstützt. - Unterstützung von Streaming-Quellen von Online-Diensten, intelligenten Gerätespeichern, USB-Stick, NAS, Bluetooth und Line-In.
5. Schnittstelle B LED: um den Gerätestatus anzuzeigen. C IR receiver: für die Fernsteuerung. D Bluetooth antenna: Wird zur Kopplung mit mobilen Geräten über einen beliebten drahtlosen Dienst verwendet. E WPS: Wird verwendet, um den Geräte-Hotspot bei Bedarf zu aktivieren. F Line input: Analoger Eingang für den Anschluss von Audiogeräten über ein RCA-Kabel.
7. Anschlussdiagramm 8. Wie verwenden Sie 8.1 App herunterladen Laden Sie die 4STREAM-Anwendung im App Store für iOS-basierte Geräte und im Google Play Store für Android-basierte Geräte herunter. Die Anwendung unterstützt Englisch, Spanisch, Französisch, Deutsch, Italienisch, Portugiesisch, Koreanisch und vereinfachtes Chinesisch,Traditionelles Chinesisch und Japanisch.
8.2 Verbindung 8.2.1 Option 1 - Verbindung über App 1. Schalten Sie das Gerät ein. 2. Verbinden Sie Ihre mobilen Geräte mit Ihrem Netzwerk. 3. Wählen Sie WLAN-Einstellungen für mobile Geräte > Verbinden Mobilgerät zum Hotspot SoundSystem_xxxx sehen Sie ein WiFi-Logo .(Drücken Sie kurz die Reset- Taste, wenn der Hotspot nicht gefunden wird) 4.
*Achtung für Android-Benutzer Mobiltelefone verschiedener Marken können Sie bitten, die Nutzung des SoundSystem WiFi-Netzwerks zuzulassen. Bitte wählen Sie ja, wenn nicht, kann es sein, dass Sie die Einrichtung nicht erfolgreich durchführen können. 8.2.2 Option 2 - Verbindung über LAN 1. Schließen Sie das Kabel an das RJ45-Ethernet an, das Gerät wird in etwa 10 Sekunden auf der App angezeigt.
8.3 App-Funktionen 8.3.1 Einstellung des Geräts Rename:to passen Sie den Gerätenamen an Speaker info: sehen Sie die Geräteinformationen wie Mac-ID, Gerät, IP, SSID usw. EQ: offen, um das Gerät im Bass und in den Höhen zu steuern Preset content: Sie sehen hier alle voreingestellten Inhalte Sleep timer: Countdown to stop the music 8.3.2 So spielen Sie Musik aus dem lokalen Speicher ab...
8.3.3 Zum Abspielen von Musik aus NAS 8.3.4 So spielen Sie eine Zeile im Modus - Schließen Sie die AUX-Kabel an das Fernsehgerät oder andere Audioquellen an. - Wählen Sie die Zeile im Modus auf der Anwendung oder der Fernbedienung。 8.3.5 So spielen Sie den Bluetooth-Modus ab - Wählen Sie den Bluetooth-Modus auf der Anwendung oder der Fernbedienung, die LED wechselt zu blau.
8.4 Streaming-Dienste Um die Online-Streaming-Dienste nutzen zu können, müssen iHeartRadio, Spotify, Tidal, Qobuz und Deezer möglicherweise ein Konto bei der Plattform des Dienstanbieters registrieren. 8.4.1 Spotify Um Spotify nutzen zu können, müssen Sie ein eigenes Spotify-Prämienkonto besitzen. Sie finden das Gerät in der Geräteliste auf der Spotify-Anwendung und wählen das Gerät, das Sie spielen möchten.
8.4.2 AirPlay Das Gerät unterstützt AirPlay1, Sie können das AirPlay wählen und Musik abspielen. 8.4.3 Qplay Unsere Geräte unterstützen QQ-Musik über das Qplay-Protokoll, Sie müssen Qplay in der QQ- Musikspielereinstellung einschalten und dann das Gerät in der Qplay-Liste finden.
8.5 Multiroom and Multizone Benutzer können in der Anwendung Multiroom und Multizone gruppieren, z. B. können Sie Gerät 1,2,3 und 4 zusammen gruppieren und dieselbe Musik synchron abspielen, oder Gerät 1 und 2 als Zone A und Gerät 3 und 4 als Zone B gruppieren und unterschiedliche Musik in Zone A und Zone B abspielen. Meister Zone A Sklave...
8.6 Linker und rechter Kanal Die Benutzer können den rechten oder linken Kanal oder den Stereomodus in der Anwendung wählen oder den linken Kanal auf Gerät A und den rechten Kanal auf Gerät B wählen und sie zusammen gruppieren und synchronisieren, um Stereo zu erzeugen.
8.10 Firmware-Aktualisierung Es wird empfohlen, Fireware zu aktualisieren, wann immer sie verfügbar ist, da dies nicht nur Fehler korrigieren oder die Sicherheit verbessern, sondern auch neue Funktionen oder Dienste hinzufügen kann. 9. Wiedergabe am PC Es gibt verschiedene Tools, um Musik vom PC aus abzuspielen 9.1 So spielen Sie Musik aus iTunes auf Mac und Windows PC ab Unsere Geräte können Audioquellen aus dem lokalen Speicher, aus der Medienbibliothek von Mac und Windows PC und aus Online-Diensten von iTunes streamen.
9.2 So spielen Sie Musik von einem Windows-PC über Foobar2000 Unsere Geräte unterstützen das UPnP-Protokoll, mit der beliebten foobar2000 können Sie Musik von einem Windows-PC auf unseren Geräten abspielen. Bitte befolgen Sie die folgenden Schritte: 1. Laden Sie die foobar2000 herunter und installieren Sie sie. 2.
Page 45
Scannen Sie die folgenden QR-Codes für weitere Informationen www.arylic.com 4STREAM App Facebook: arylicme YouTube:Arylic Unterstützung und After Service : info@arylic.com...
F: Unterstützen Ihre Geräte Airplay und DLNA-Anwendungen von Drittanbietern? A: Ja. Sie unterstützen Airplay und Anwendungen von Drittanbietern wie BubbleUPNP... F: Wie viele Zonen können Sie in einem System gruppieren? A: 12 Räume sind das Maximum, während 8 Zonen empfohlen werden. F: Welche Entfernung kann Ihr drahtloses Audiosystem abdecken? A: Sobald das System mit Ihrem WiFi-Router verbunden ist, können Sie Ihre Musik überall dort streamen, wo es ein WiFi-Signal gibt.
Page 48
@Copyright 2020 von Arylic. Alle Rechte vorbehalten. Die in diesem Leitfaden enthaltenen Informationen werden als genau und zuverlässig angesehen. Arylic übernimmt keine Verantwortung für eventuelle Fehler in diesem Handbuch. Arylic behält sich das Recht vor, ohne vorherige Ankündigung Änderungen an den Spezifikationen und/oder dem Design des oben genannten Produkts vorzunehmen.
Need help?
Do you have a question about the A50 and is the answer not in the manual?
Questions and answers