Panasonic MICRO-IMAGECHECKER PV310 Use Manual page 272

Transmitting Product Types and Environment Data from a Compact Flash Memory
Card to the PV310 (%F)
This command transmits the settings and configuration data saved on the Compact Flash memory card to PV310
using the signals from an external device such as PLC. This function will be helpful if more than 64 product types
are needed. The product types and configuration data are stored in the folders (Program 01 to Program 99) under
Panasonic MEW Vision¥PV310¥Data.
Communication direction
Transmission from
external device
Response: Normal
(at the end of transmitting)
Response: Error 1
Response: Error 2
• ERROR signal = "ON"
• Error Code: E0173 is
displayed on the
screen
264
Command / Description
% F ? ? CR
??: 01 to 99 (Specify the number of the folders where product types and configuration
data are stored in 2-digit form.)
% F CR
% U CR
Cause:
Command in the unspecified form or not provided was received.
Examples:
C
- %F (any other checker number than 01 - 99 was specified. (1 or 3-digit
R
numbers were specified.
C
%B01
-
R
% Z CR
Causes:
• Memory card is not inserted into the PV310.
• The specified folder does not exist in the path.
(Panasonic MEW Vision¥PV310¥Data).
• Configuration data file "TYPEENV AXD" does not exist in the specified folder.