Table of Contents
Advertisement
1.3 Keypad
No.
Name
Description
1
A, B, C keys
A key
B key
C key
2
ENTER key
Cursor
Operation
Confirmation
Operation
3
Connector
Connects the keypad to the PV310.
Cursor Operation and Determination Operation with the Cursor Lever
Cursor operation
If you try to move the cursor while pressing and holding down the ENTER key, the highlighted option can be
determined. Release and move the ENTER key when you move the cursor.
Connect only the designated keypad (ANM852XX) to the PV310.
12
Starts an inspection.
Executes a test in SETUP mode and an inspection in RUN mode.
Displays a sub-menu for each menu. Press and hold down this key for
more than one second to save the screen copy on the Compact Flash
memory card.
Switches between SETUP mode and RUN mode. Goes back to the
previous hierarchy or close the window.
Moves the cursor in the up to 8 directions.
Use this lever to select the menu and move the start and end points.
Executes (or Determines) the selected option.
Determination (ENTER) key operation
Advertisement
Table of Contents
